The mall specializes in producing and selling high-purity experimental products for "scientific research institutes, universities and other" scientific research institutions and laboratories. For experiments, we should buy high-cost and high-purity products instead of low-cost and low-purity products. We should buy according to the actual use. Although the purity of industrial products looks the same. We should avoid low purity industrial products entering the laboratory, which will affect the accuracy of experimental results.

Customize three port electrolytic cell of various specifications. Please tell the customer service personnel the size you need.

The electrodes in the photos are for demonstration only and are not included.

S111: three port H-type electrolytic cell (10-10-10ml) sealed type

S222: three port H-type electrolytic cell (20-20-20ml) sealed type

S333: three port H-type electrolytic cell (30-30-30ml) sealed type

S555: three port H-type electrolytic cell (50-50-50ml) sealed type

S553: three port H-type electrolytic cell (50-50-30ml) sealed type

S10103: three port H-type electrolytic cell (100-100-30ml) sealed

S15153: three port H-type electrolytic cell (150-150-30ml) sealed type

S20203: three port H-type electrolytic cell (200-200-30ml) sealed type

S25253: three port H-type electrolytic cell (250-250-30ml) sealed type

S30303: three port H-type electrolytic cell (300-300-30ml) sealed type

C111: three port H-type electrolytic cell (10-10-10ml) ordinary type

C222: three port H-type electrolytic cell (20-20-20ml) ordinary type

C555: three port H-type electrolytic cell (50-50-50ml) ordinary type

Introduction to three port H-type electrolytic cell:

Three slots correspond to three electrodes, which are counter electrode, working electrode clamp and reference electrode respectively

The reference electrode and the working electrode clamp are communicated through a capillary, which plays the role of protecting the electrode and approaching the working electrode

The counter electrode and the working electrode are connected through the glass sand core, which also plays the role of ion exchange without affecting the power on (provided that the two working rooms are filled with different liquids)

The volumes of the three pools can be the same or different.

Considering comprehensively, if the volume is small, make it the same volume; If the volume of the working electrode chamber exceeds 100ml, the volume of the electrode chamber and the reference electrode chamber should not be too large, especially the volume of the reference electrode chamber should be smaller, so as to make the reference electrode closer to the working electrode and reduce the influence of potential difference.

Cover material: polytetrafluoroethylene, rubber plug is not recommended, because the rubber plug first increases the height, the electrode hole is irregular, and the later electrode insertion can not ensure the level. The polytetrafluoroethylene cover is relatively matched.

The electrode on the picture is a demonstration product (not included). If you need to buy it separately, please consult the customer service

The optional electrodes are as follows:

Working electrode — 10 * 10mm (length and width) platinum electrode clamp

Auxiliary electrode — 10 * 10 * 0.1mm (length, width and thickness) platinum sheet electrode

Reference electrode – silver chloride electrode or calomel electrode (neutral solution)

Reference electrode — mercurous sulfate electrode (acid solution)

Reference electrode — mercury oxide electrode (alkaline solution)