Description

The mall is specialized in the production and sales of high-purity experimental products for "scientific research institutes, universities and other" scientific research institutions and laboratories. When purchasing high-purity industrial products for production in non low-cost factories, relatives should buy them according to their own actual use to avoid "claiming" that they can also enter the laboratory as experimental products and the same industrial production products, which will affect the accuracy and accuracy of experimental results.

Product Name: spectroelectrochemical cell.

Material: made by full quartz melting method.

1. The electrolytic cell body is polished with all quartz, with light transmission on all sides and no adhesive.

2. The light transmittance of the electrolytic cell is greater than 95%.

3. The cover of the electrolytic cell is peek.

4. The matching electrodes of the electrolytic cell are: reference silver silver chloride electrode (electrode rod diameter 3.0mm), comparison platinum wire electrode (platinum wire diameter 0.5mm), working electrode platinum mesh electrode (platinum mesh 6mm length and 7mm width).

5. The working electrode of the electrolytic cell can also be replaced with glass carbon electrode with diameter of 3.0mm, gold disk electrode, etc.

6. The slit size of the electrolytic cell is 8mm * 6.5mm * 1mm.

7. The square body size of the electrolytic cell is 12mm * 12mm.

8. The electrolytic cell is a sealed system.

9. The quartz sealing part of the electrolytic cell is designed with an external threaded port, and the inner core is made of PEEK material with 360 degree rotation, so that the electrode can accurately correspond to the gap, which is sealed by tightening the outer cover of PEEK material.

10. The partial sealing of the electrode of the electrolytic cell is realized on the PTFE plug, and the sealing effect is achieved by extruding the O-ring through the sealing screw.