• Wed. Feb 8th, 2023

LabSyst

All for Scientific R&D

PTFE advanced sealed photo catalytic electrolytic reaction cell with inlet and outlet valves

  • Home
  • PTFE advanced sealed photo catalytic electrolytic reaction cell with inlet and outlet valves
Sale!

PTFE advanced sealed photo catalytic electrolytic reaction cell with inlet and outlet valves

$1,547.00$3,192.00

Clear
SKU: 3256804182936953 Category:

Description

  • Origin: Mainland China
  • DIY Supplies: ELECTRICAL

Commodity list:

50ml=50ml electrolytic cell + supporting three electrodes + inlet valve + outlet valve. Other specifications in the options have the same meaning.

The default matching three electrodes are: silver chloride electrode + platinum sheet electrode (platinum sheet size: 10mm long × 10mm wide × Thickness: 0.1mm, diameter of electrode rod: 6mm) + electrode clamp (thickness of sample shall not exceed 3mm). If the silver chloride electrode is replaced, you can leave a message in the order note and replace the silver chloride electrode with the desired electrode name. For example, order notes: change the silver chloride electrode to calomel electrode, and then the three electrodes we send will be changed to calomel electrode + platinum sheet electrode + electrode clamp: if you change the silver chloride electrode to mercuric oxide electrode or mercurous sulfate electrode, please perform the same operation. Please leave a message on the order or contact the customer service personnel.

1. The electrolytic cell is a photoelectric chemical cell.

2. The window of the electrolytic cell is made of quartz glass, with a light transmittance of more than 95%.

3. The working electrode of the electrolytic cell can use non-standard samples, but it is necessary to cover the holes with a fixed area.

4. The electrolytic cell has a default area of 1 square centimeter and can also be customized.

5. The electrolytic cell is sealed by screwing in the back screw to hold the working sample, and pressing the fixed area hole with the working electrode.

6. The default standard area of the electrolytic cell is 1 square centimeter, which can also be customized according to requirements.

7. The electrode part of the electrolytic cell realizes the internal plugging of the electrode through the earphone jack on the cover, so that the electrode system reaches a high-level seal.

8. The electrolytic cell is equipped with an aeration device that can ventilate under the liquid level, and the atmosphere is adjusted according to different experiments.

9. The quartz plate of the electrolytic cell is removable and can be replaced quickly.