Description
- Origin: Mainland China
- DIY Supplies: ELECTRICAL
Commodity list:
The default matching three electrodes are: silver chloride electrode + platinum sheet electrode (platinum sheet size: 10mm long × 10mm wide × Thickness: 0.1mm, diameter of electrode rod: 6mm) + electrode clamp (thickness of sample piece shall not exceed 3mm). If the silver chloride electrode is replaced, you can leave a message in the order notes and replace the silver chloride electrode with the required electrode name. For example, the order remark information: change the silver chloride electrode to calomel electrode, and then the three electrodes we send will change to calomel electrode + platinum sheet electrode + electrode clamp: if you change the silver chloride electrode to mercuric oxide electrode or mercurous sulfate electrode, please perform the same operation. Please leave a message on the order or contact the customer service personnel.
An in-situ electrochemical reaction cell suitable for synchrotron radiation X-ray absorption spectrum is specially used for gas operation.
1. Air inlet and outlet are set in the tank body to meet the different atmosphere conditions and air tightness requirements of electrochemical reaction.
2. The overall installation of the device is simple and fast, and each component is easy to clean.
3. The main tank body is made of PEEK material, the volume is normal by default, and the size can be customized according to customer requirements (if customized, please contact customer service).
4. Optical window material: Kapton film.
